EasyManua.ls Logo

Parkside 290754 - Attaching;Disconnecting the Battery Pack To;From the Appliance; Before Use; Charging the Battery Pack (See Fig. A); Safety Guidelines for Battery Chargers

Parkside 290754
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PDSSA 20-Li A1
18 
GB
IE
Safety guidelines for battery chargers
This appliance may be used by chil-
dren aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person.
The charger is suitable for indoor use
only.
WARNING!
To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person.
ATTENTION!
Hot surface.
Risk of burns.
Before use
Charging the battery pack (see fig. A)
CAUTION!
Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger.
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
Connect the battery pack
to the rapid battery
charger (see Fig. A).
Insert the power plug into the socket. The control
LED
lights up red.
The green control LED
indicates that the
charging process is complete and the battery
pack is ready.
CAUTION!
If the red control LED
flashes, this means
that the battery pack has overheated and
cannot be charged.
If the red and green control LEDs
both
flash, this means that the battery pack is
defective.
Insert the battery pack
back into the appli-
ance.
Switch off the charger for at least 15 minutes
between successive charging sessions. Also
disconnect the power plug from the mains
power socket.
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
Push the rotation direction switch
into the
middle position (lock). Allow the battery pack
to click into the handle.
Removing the battery pack:
Press the release button
and remove the
battery pack.

Table of Contents

Related product manuals