12
GB
Attenuation table for ear protector
Frequency (Hz) 63 125 250 500 1000 2000 4000 8000
Mean valve M
f
(dB)
14.3 10.2 12.1 22.6 26 30.3 33.5 36.2
Standard deviation
sf (dB)
4.8 4.3 3,3 4.3 5.7 3.1 3.7 5.8
Presumed protective
effect APV: M
(dB)
9.5 5.9 8.8 18.2 20.4 27.2 29.8 30.4
Minimum
requirements
H
Minimum
requirements
M
Minimum
requirements
L
12 11 9
H (dB) 27.4 M (dB) 18.7 L (dB) 11.5 SNR (dB) 21.6
Mean value
Hm
(dB)
30.1
Mm
(dB)
21.9 Lm (dB) 14.9
SNRm
(dB)
24.6
Standard deviation Hs (dB) 2.7 Ms (dB) 3.2 Ls (dB) 3.5 SNRs (dB) 3
Notes on Safety
Markings on the safety
goggles
PAS001
Product code
GRIZZLY
TOOLS
Manufacturer code
166
Number of the standard (see
EU Declaration of Conformity)
CE
CE marking
1
Optical class
F
Protection class, low energy
impact (6 mm ball at 45 m/s)
Safety instructions for safety
goggles
• The lenses and frames of these safety
goggles are not unbreakable.
• Use these goggles only to protect your
particles
• Handle the product with care. Shocks,
blows, or even falling from a low
height can damage the product.
• Check the safety goggles frequently
for damage. Coatings and scratches
on the lenses restrict vision and thus no
longer guarantee complete protection.
• No parts of these goggles are replace-
able or exchangeable. If any part of
the goggles is found to be unusable,
the entire product should be discarded.
• Optical class 3 lenses are not intended
for long-term use.