To Next PageTo Next PageWhat to do if Parkside Pole Saw makes no progress?
If your Parkside Pole Saw is making no progress while cutting, it might be due to a dry or overheating saw chain, or the chain may be sagging. To resolve this, top up the oil, grind, replace, or tighten the saw chain.
Why does Parkside 380747 2110 Pole Saw chain run with difficulty?
If the saw chain of your Parkside Pole Saw is running with difficulty, coming off, or has extended, the chain tension might be insufficient. You should check the chain tension.
General| Model Number | 380747 2110 |
|---|---|
| Type | Pole Saw |
| Power Source | Electric |
| Voltage | 230 V |
| Power | 750W |
| Chain Speed | 10 m/s |
| Cable Length | 10 m |
| Bar Length | 20 cm |
Guidelines for maintaining a safe and clear operational environment.
Precautions to prevent electric shock hazards during operation.
Advises on operator alertness, PPE, and avoiding unintentional starts.
Proper usage, maintenance, and handling procedures for power tools.
Safe practices for handling, charging, and storing battery packs.
Details on preventing dangerous kickback situations during operation.
Additional safety measures and warnings for safe operation.
Rules for safe operation and charging of battery chargers.
Step-by-step guide for charging the battery.
Procedures for installing the saw chain and blade.
How to properly tension and inspect the saw chain.
Common problems and their solutions for the cordless pruner.
