Parkside PABS 20-Li E6 - General Description; Extent of the Delivery; Overview of Device Parts; Functional Description

5
GB CY
General description
The illustrations are on the
front and back fold-out page.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
- Cordless Drill
- 8 Screw bits, length 50 mm:
Cross recess: PH0, PH1, PH2
PZ0, PZ1, PZ2
Recess: SL5, SL6
- 8 drill bits: 1.5 mm, 2.5 mm, 3 mm,
4 mm, 5 mm, 6 mm, 8 mm, 10 mm
- Storage case
- Instruction Manual
Battery and charger are not
included.
Overview
1 Drill chuck aperture
2 Keyless drill chuck
3 Torque adjustment ring
4 Speed selector
5 Bit holder
6 Button for charge status display
7 Battery Indicator
8 Battery
9 Battery release button
10 LED working light
11 Direction of rotation switch
12 On/off switch
13 Drill bits
14 Screw bits
15 Storage case
16 Charger
17 Metal belt clip
Functional description
The cordless drill with two-speed gearing
has a 25+1 level torque adjustment, left/
right running, a removable keyless chuck
and an LED working light. Please refer to
the descriptions below for information on
how the operating elements work.
Technical data
Cordless Drill Set ....... PABS 20-Li E6
Motor voltage U ..........................
Idling speed n
0
1st gear ............................ 0-400 min
-1
2nd gear .........................0-1400 min
-1
Maximum torque ..........................40 Nm
Span-chuck ............................1.5-13 mm
Weight (without battery charger) .. 1.28 kg
Drilling capacity
for wood .......................... max. 30 mm
for steel ........................... max. 13 mm
Protection category...........................IPX0
Temperature...........................
Charging process ...................
Operation .......................... 
Storage .................................
Sound pressure level
(L
pA
) ....................72.1 dB(A), K
pA
= 5 dB
Sound power level
(L
WA
) ..................83.1 dB(A); K
WA
= 5 dB

h
)
max. ............... <2,5 m/s
2;
K= 1,5 m/s
2
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.