Parkside PAS 4 C4 - Before Use; Charging the Appliance Battery

PAS 4 C4
GB
│
MT
│
39 ■
Before use
Charging the appliance battery (seefig.A)
NOTE
► The battery is supplied partially charged. Before first use,
charge the battery in the charger for at least 1 hours. This
guarantees full battery power. Li-ion batteries can be
charged at any time without adversely affecting their service
life. Interruption of the charging process will not damage the
battery.
► If the battery charge level indicator 3 lights up red during
use, the battery is at less than 30% of its capacity and needs
to be charged.
► Never charge the cordless appliance when the ambient
temperature is below 10°C or above 40°C. If a lithium-ion
battery is to be stored for an extended period, the charge
level should be checked regularly. The optimum charge level
is between 50% and 80%. The storage climate should be
cool and dry and the ambient temperature should be
between 0°C and 50°C.
Start charging
♦ Connect the USB-C plug on the charging
cable
9b
to the charging socket 5.
♦ Connect the USB plug of the charging cable
9a
to the charger
9.
♦ Connect the charger 9 to a 100 – 240 V ∼
50 – 60 Hz power source.
The battery is fully charged when the battery level display 3 chang-
es from red to green.