17GB
Thread Action
33.3 mm
(G1”)
Unscrew the pre-installed adapter
[1]
from the union nut [3].
Screw the union nut
[3] onto the thread of
the faucet.
26.5 mm
(G¾”)
The adapter [1] is pre-installed in
the union nut
[3]. If the adapter is
removed (e.g. for cleaning), screw it
back into the union nut.
Screw the adapter
[1] onto the thread of
the faucet.
Other sizes Faucet adapters are available from
speciality retailers.
Do not use any tools for tightening the parts.
The connector [8] is pre-installed onto the product.
If the connector is removed (e.g. for cleaning),
screw it back onto the product.
Connect a water hose to the connector
[8].
Open the faucet.
If defects/leaks occur: Wrap the thread of the
faucet with sealing tape.
To Next Page
Loading...
