Parkside PBSG 95 E6 - Translation of the Original EC Declaration of Conformity

90
GB
MT
Translation of the original
EC declaration of conformity
We hereby confi rm that the
Drill Bit Sharpener
model PBSG 95 E6
Serial number 000001 - 225000
conforms with the following applicable relevant version of the EU guide-
lines:
2006/42/EC • 2014/30/EU • 2011/65/EU* & (EU)2015/863
In order to guarantee consistency, the following harmonised standards as
well as national standards and stipulations have been applied:
EN 62841-1:2015 • EN ISO 12100:2010
EN IEC 55014-1:2021 • EN IEC 55014-2:2021
EN IEC 61000-3-2:2019/A1:2021 • EN 61000-3-3:2013/A1:2019
EN IEC 63000:2018
This declaration of conformity is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
GERMANY
15.04.2022
* The object of the declaration described above satisfi es the provisions of Directive
2011/65/EU of the European Parliament and the Council of 8 June 2011 on
limiting the use of certain harmful substances in electrical and electronic appli-
ances.
Christian Frank
Documentation Representative