Parkside PDSSA 18 A1 Translation Of The Original Instructions

7
IEGB
General safety instructions
for power tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, re
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term “Power Tools” used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-oper-
ated power tools (without power cord).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of ammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodied plugs and
matching outlets will reduce risk of electric
shock.
Protection class II
Electrical appliances must not be dis-
posed of with the domestic waste.
Green LED lights ashes without battery
Charger ready
Green LED lights up
Battery such alleged charged
Red LED lights up Battery charging
Green LED ashes with battery
Battery has to be charged in advance for
30 minutes before charging starts
Red and green LED ashes Battery defect
Red and green LED lights up
Battery too cold or too warm.
Battery can not be charged
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.

Parkside PDSSA 18 A1 Specifications

General

Brand	Parkside
Model	PDSSA 18 A1
Category	Impact Driver
Language	English