Parkside PEPS 3 A1 Translation Of The Original Instructions

PEPS 3 A1■ 4
│
GB
│
CY
Noise and vibration data
The measured values have been determined in accordance with
EN62841. The A-rated noise level of the power tool is typically:
Sound pressure level L
pA
= 47.4 dB (A)
Sound power level L
WA
= 58.4 dB (A)
Uncertainty K K
pA/WA
= 3 dB
Vibration values (vector total of three directions) determined in
accordance with EN 62841:
Screwing: vibration emission value a
h
< 2.5 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
► The vibration emission values and the noise emission values
given in these instructions have been measured in accordance
with a standardised test procedure and can be used for com-
parison of the power tool with another tool.
► The specified total vibration values and the noise emission
values can also be used to make a provisional load estimate.
General power
toolsafety warnings
WARNING!
► Read all safety warnings, instructions, illustrations and speci-
fications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.

Parkside PEPS 3 A1 Specifications

General

Brand	Parkside
Model	PEPS 3 A1
Category	Power Screwdriver
Language	English