To Next PageTo Next PageWhy does the engine of my Parkside PFDF 900 B2 slow down and stop?
If the engine of your Parkside Power Tool is slowing down and stops, this could be because the device is overloaded. Try reducing the pressure on the attachment tool. It may also be because the workpiece is unsuitable.
What causes low work output in my Parkside Power Tool?
If you're experiencing low work output with your Parkside Power Tool, the attachment tool may be blunt or worn down. Try changing the attachment tool.
Why my Parkside Power Tool does not start?
If your Parkside Power Tool doesn't start, the issue might be due to no mains power supply. Check the socket, mains connection cable, plug, and fuse. If needed, have them repaired by a qualified electrician. Alternatively, the On/Off switch or the motor could be defective, requiring you to contact the service center.
What to do if my Parkside PFDF 900 B2 works with interruptions?
If your Parkside Power Tool works with interruptions, it could be due to an internal loose contact, requiring you to contact the service center. It may also be that the On/Off switch is broken.
How to fix a Parkside PFDF 900 B2 Power Tool when the attachment tool does not rotate smoothly?
If the attachment tool of your Parkside Power Tool doesn't rotate smoothly and you hear abnormal noises, it may be because the clamping flange is loose. Try tightening the clamping flange. Another reason may be that the attachment tool is defective, so you should change it.
What to do if my Parkside Power Tool has excessive dust formation?
If there is excessive dust formation when using your Parkside Power Tool, the dust collection bag may be full. Empty the dust collection bag.
General| Power | 900 W |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| No-load speed | 0-3000 rpm |
| Impact rate | 0-48000 bpm |
| Max. drilling diameter in wood | 30 mm |
| Max. drilling diameter in steel | 13 mm |
| Max. drilling diameter in concrete | 16 mm |
| Drill chuck capacity | 1.5 - 13 mm |
| Impact rate (bpm) | 0-48000 bpm |
Details the intended applications and limitations of the biscuit jointer for safe and effective operation.
Provides a general overview of the device, referencing illustrations on the front and back fold-out pages.
Explains the tool's capabilities for producing grooves for flat dowels and operating elements.
Lists key specifications such as voltage, speed, weight, and cord length for the biscuit jointer.
Explains the significance of danger, warning, and caution symbols used in the manual for user safety.
Illustrates and explains the meaning of various symbols found on the device and in the instruction manual.
Comprehensive safety guidelines covering work area, electrical, personal, and general tool use and care.
Covers essential safety practices for maintaining a clean, well-lit work area and avoiding explosive atmospheres.
Outlines critical safety measures related to power tool plugs, cords, and protection against electric shock.
Emphasizes staying alert, using protective equipment, and preventing unintentional starting for personal safety.
Provides guidance on proper tool usage, care, storage, and maintenance to prevent accidents and damage.
Provides specific safety guidelines for operating flat dowel cutters, including guard use and blade selection.
Offers further safety advice, including dust bag attachment, eye/mask protection, and blade condition.
Highlights inherent risks like hand-arm vibration and potential injuries from ejected parts or heat.
Covers essential preparation steps before operating the biscuit jointer, including safety checks and setup.
Introduces the various control elements on the device, such as the spindle lock and on/off switch.
Explains how to connect the dust extraction system, including attaching the dust bag and suction nozzle.
Details how to adjust the milling depth using the dial and fine adjustment screw for precise cuts.
Guides users on setting the height stop for accurate groove placement relative to the workpiece edge.
Describes how to adjust the angle stop for milling grooves at various angles, including preset positions.
Provides instructions on how to safely switch the biscuit jointer on and off during operation.
Explains the process of scribing a workpiece and preparing it for milling operations.
Outlines the criteria and procedure for securely attaching the biscuit jointer cutter to the tool.
Details the steps for joining workpieces after milling, including applying glue and inserting flat dowels.
Provides essential information and precautions for safely transporting the biscuit jointer.
Explains how to clean the device, emphasizing safety precautions and avoiding water or solvents.
Provides a step-by-step guide for safely changing the router blade, including tools required and procedures.
Covers routine checks and maintenance tasks to ensure the tool's safety and proper functioning.
Provides recommendations for storing the device and accessories to maintain their condition and safety.
Offers solutions for common problems encountered with the device, such as it not starting or performance issues.
Advises on the proper recycling of the device and accessories according to WEEE directives.
Details the 3-year guarantee provided with the product and the customer's statutory rights.
Clarifies the guarantee period, claims for defects present at purchase, and non-extendable repair times.
Specifies what the guarantee covers (material/manufacturing defects) and what it excludes (wear parts, damage).
Provides instructions for efficient handling of guarantee queries, including necessary documentation and shipping.
Explains how to obtain repair services for issues not covered by the warranty, including cost estimates.
Provides contact information for service centers in Great Britain and Malta for support and repairs.
Lists the importer's details, noting it is not a service address and directing users to contact the service center first.
Informs users where to obtain spare parts and accessories for the biscuit jointer.
Presents the official EC declaration of conformity, listing applicable directives, standards, and manufacturer details.
Displays a detailed diagram of the device's components, with numbered parts for identification and assembly.
