PFS 400 A1
GB
│
IE
│
NI
│
CY
│
1 ■
Contents
Introduction ......................................................2
Intended use ................................................................ 2
Features ................................................................... 2
Package contents ............................................................ 2
Technical data .............................................................. 2
General power tool safety warnings .................................3
1. Work area safety .......................................................... 3
2. Electrical safety ........................................................... 3
3. Personal safety ............................................................ 4
4. Power tool use and care .................................................... 4
5. Service .................................................................. 5
Additional safety instructions for paint spray guns ................................... 5
Working procedures ..............................................5
Viscosity ................................................................... 5
Preparing the surface ......................................................... 6
Setting up .......................................................6
Assembly/disassembly ........................................................ 6
Choosing/changing the nozzle ................................................. 6
Adding spray material ........................................................ 6
Switching the appliance on/off ................................................. 6
Selecting a spray profile ....................................................... 7
Selecting a jet type ........................................................... 7
Maintenance and cleaning ..........................................7
Cleaning/replacing the air filter ................................................. 7
Disposal .........................................................8
Kompernass Handels GmbH warranty ...............................9
Service .........................................................10
Importer .......................................................10
Translation of the original Conformity Declaration .....................10