6
IE
GB
CY
opening the equipment, are to be car-
ried out by an electrician. In the case
of repairs, always contact our service
centre.
Electricalsafety:
Caution:toavoidaccidentsand
injuriesfromelectricshocks:
• The plug and socket of an extension
cable must be water-tight!
Unsuitable extension cables can
be dangerous as people can be
harmed by an electric shock!
• Protect the electric plug connections
against moisture.
• If there is a risk of ooding, x the plug
connections in an area that is safe from
ooding.
• Ensure that the mains voltage matches
the specications on the rating plate.
• Connection to the mains must be carried
out by an experienced electrician and
meet the requirements of IEC 60364-1.
• The electrical installation shall be ac-
cording to national wiring rules.
• The device must only be connected to a
mains socket via a residual-current cir-
cuit breaker (RCD) with a rated leakage
current of not more than 30 mA. Fuse:
at least 13 ampere.
• Before each use, check the equipment,
cable and plug for damage.
• If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualied per-
son in order to prevent hazards.
• Do not pull the plug from the socket by
the cable. Protect the cable from heat,
oil and sharp edges.
• Do not carry or x the equipment by the
cable.
• Use only extension cables that are pro-
tected from spray water and designed
for outdoor use. Always fully unroll a
cable drum before use. Check the cable
for damage.
• Before any work on the equipment, dur-
ing work breaks and in the case of non-
use, remove the plug from the socket.
• The cross-section of the power supply
cable must not be less than
2 x 2,5 mm².
Areas of Application
Only use the pressure washer in the follow-
ing private home areas:
• To clean machines, vehicles, buildings,
work tools, facades, terraces, gardening
tools, etc. with a high-pressure water
jet.
• Only use with original accessories and
spares.
• cleaning the object according to its
manufacturer’s information.
General Description
The diagram of the most im-
portant functional elements
can be found on the foldout
side.
Overview