To Next PageTo Next PageWhy won't my Parkside PHDB 4 B2 Pressure Washer engine start?
Your Parkside Pressure Washer engine might not start due to several reasons: the automatic oil switch-off may be activated (check oil level and add engine oil if needed), there might be soot deposit on the spark plug (clean or replace the spark plug, ensuring a spark plug gap of 0.7–0.9 mm), or there could be no fuel (add fuel).
What to do if my Parkside Pressure Washer is leaking water?
A small leak from your Parkside Pressure Washer is normal. The high-pressure pump can leak up to 3 drops per minute. If the leak is more serious, have the appliance checked by customer service.
Why is the cleaning agent not being drawn in my Parkside PHDB 4 B2?
The cleaning agent may not be drawn in because the high-pressure nozzle is fitted (fit the low-pressure nozzle) or the cleaning agent hose is leaking or blocked (inspect and clean the cleaning agent hose).
How to fix Parkside Pressure Washer engine that cannot be started?
If the Parkside Pressure Washer engine won't start, it could be due to several reasons. First, the automatic oil switch-off might be activated; in this case, check the oil level and add engine oil if needed. Second, the spark plug may have soot deposits; clean or replace the spark plug, ensuring a spark plug gap of 0.7–0.9 mm. Lastly, the pressure washer might be out of fuel; add fuel to resolve this.
What to do if Parkside PHDB 4 B2 cleaning agent is not drawn in?
If your Parkside Pressure Washer is not drawing in cleaning agent, the high-pressure nozzle may be fitted. Try fitting the low-pressure nozzle. Also, the cleaning agent hose might be leaking or blocked, so inspect and clean the cleaning agent hose.
What to do if the nozzle is blocked on my Parkside PHDB 4 B2 Pressure Washer?
If the nozzle is blocked or eroded, clean or replace it.
What to do if there is air in the system of my Parkside Pressure Washer?
Bleed the appliance (see "Use").
What to do if low-pressure nozzle is fitted to my Parkside PHDB 4 B2?
Fit the high-pressure nozzle.
What to do if Parkside PHDB 4 B2 Pressure Washer engine running speed is too low?
If the running speed of the Parkside Pressure Washer engine is too low, check the engine's running speed against the technical specifications.
General| Brand | Parkside |
|---|---|
| Model | PHDB 4 B2 |
| Category | Pressure Washer |
| Language | English |
