Parkside PHDP 180 C2 - Translation of the Original EC Declaration of Conformity

GB
MT
44
Pos. nr.NameOrder No.
4Lance91106183
22Turbo dirt blaster91106184
233-in-1 nozzle91106185
Translation of the original EC declaration of
conformity
Product: Pressure Washer
Model: PHDP 180 C2
Serial number: 000001 – 016000
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
2006/42/EC • 2014/30/EU • 2000/14/EC &2005/88/EC •
 2011/65/EU &(EU)2015/863
The object of the declaration described above is in conformity with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the re-
striction of the use of certain hazardous substances in electrical and electronic equip-
ment.
To ensure conformity, the following harmonised standards and national standards and
regulations have been applied:
EN 60335-1:2012/A15:2021 •EN 60335-2-79:2012 •EN62233:2008
EN IEC 55014-1:2021 •EN IEC 55014-2:2021 •EN IEC 63000:2018
ENIEC61000‑3‑2:2019/A1:2021 •EN61000‑3‑11:2019
In accordance with the Directive 2000/14/EC relating to noise emission, the following is
confirmed:
Sound power level (L
WA
)
–Measured: 92.9dB(A)
–Guaranteed: 98dB(A)
Followed conformity assessment procedure according to 2000/14/EC , Annex V .
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Str. 20
63762 Großostheim
GERMANY
30.11.2022
Christian Frank
Authorised representative of documentation