Parkside PLS 2600 A1 User Manual

18
IEGB NI
Trouble shooting
Problem Possible cause Corrective action
Appliance
won‘t start
No mains power supply
Check the socket, cable, line, plug
and fuse and have them repaired by
a qualied electrician if necessary.
Worn out carbon brushes
Send in to Service Centre for repair
Motor faulty
On/Off switch (3) defective
Intermittent
operation
Internal loose contact
Send in to Service Centre for repair
Power cable damaged
On/Off switch (3) defective
Weak or no
suction pow-
er/throughput
Collection bag (10) is full Empty collection bag
Collection bag (10) is dirty Clean collection bag
Impeller, blower (11) or suction
pipe (13) is clogged or blocked
see „Removal of clogging
and blockage“
Impeller does
not move
Foreign body blocking the im-
peller
Remove the blockage (see „Removal
of clogging and blockage“)
Spare parts/Accessories
Spare parts and accessories can be obtained at
www.grizzlytools-service.eu
If you have issues ordering, please use the contact form.
If you have any other questions, contact the ”Service-Center” (see page 20).
1 Carrying strap .........................................................................91100669
10 Collection bag .........................................................................91100668
11+12 Blower pipe + Wheels ..............................................................91100667
13 Suction pipe ............................................................................91100665
15 Central pipe ............................................................................91100664

Parkside PLS 2600 A1 Specifications

General

Brand	Parkside
Model	PLS 2600 A1
Category	Blower
Language	English