5
IEGB NI
The user or operator is responsible for ac-
cidents causing injury to other people or
damage to property.
The manufacturer cannot be held liable
for damage when the blower is not used
in conformity with its intended purpose or
due to incorrect operation.
A leaf vacuum is not intended for
wet conditions! Avoid wet materi-
als such as leaves and dirt, twigs,
branches, pine needles, grass,
earth, sand, mulch, cuttings, etc.
Do not use on wet lawns, grass
areas or elds. Misuse may lead
to congestion in the shredding unit
and lead to reduced functionality.
The machine may need to be com-
pletely dismantled and cleaned.
This work should be carried out by
a qualied service technician and is
not covered by guarantee.
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Scope of delivery - Parts list
Unpack the device and check for complete-
ness. Dispose of the packaging material
properly.
- Electric Leaf Vacuum/Blower
- Blower pipe
- Suction pipe
- Central pipe
- 2 Phillips screws
- Carrying strap
- Collection bag
- Instructions for use
Function description
The electric leaf vacuum/blower has a
blowing/vacuuming unit for the blowing
and suction functions. In blowing mode,
you can quickly blow together fallen leaves
or blown them out of places that are dif-
cult to reach. In suction mode, the leaves
are shredded to save space, and blown
out of the ejector outlet into the collection
bag.
Refer to the following descriptions for a
functional description of the controls.
Overview
1 Carrying strap
2 T handgrip
3 On/Off switch
4 Handgrip
5 Motor housing
6 Cable strain relief
7 Power cable
8 Mode switch
9 Collection bag locking button
10 Collection bag
11 Blower pipe
12 Wheels
13 Suction pipe
14 Fastening eyelet for collection
bag
15 Central pipe
16 Carabiner (collection bag)
17 Ejector opening
18 Phillips screw
19 Fastening eyelet for carrying
strap
1a Carabiner (carrying strap)
To Next Page
Loading...
Need help?
General
