To Next Page

To Previous Page

PLS 48 C1

e) When operating a power tool outdoors, use an extension cord suitable

for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp location is unavoidable, use a

residual current device (RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

g) Always hold the power cord away from the working area of the appliance

and run it to the rear away from the appliance.

h) Always pull out the plug if you leave the appliance unattended or carry out

work on the appliance.

3. Personal safety

■ This appliance may be used by children aged

8 years and above and by persons with limited

physical, sensory or mental capabilities or lack of

experience and knowledge, provided that they

are under supervision or have been told how to

use the appliance safely and are aware of the

potential risks. Children must not use the appli-

ance as a plaything. Cleaning and user mainte-

nance tasks may not be carried out by children

unless they are supervised.

a) Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the inﬂuence of drugs, alcohol or medication. A moment of inat-

tention while operating power tools may result in serious personal injury.

■ RISK OF BURNS! Do not touch the heated soldering tip or the

molten solder. There is a risk of being burnt. Always allow the ap-

pliance to cool down completely before changing components,

cleaning or checking it.

Parkside PLS 48 C1 User Manual

Other manuals for Parkside PLS 48 C1