Parkside PMFS 200 B2 Translation Of The Original Instructions

GB
5
IE NI
General Description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Scope of delivery
Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
• Sander motor unit
• Hand sander disc
• Eccentric grinder disc
• Orbital sander disc
• Sanding sheets
(grain size P80 / P240)
- 2x for hand sander disc
- 2x for eccentric grinder disc
- 2x for orbital sander disc
• Dust collection box
• Adapter for external dust extraction
• 4 replacement Phillips screws
• 4 replacement rubber pins
• Case
• Instruction Manual
Overview
1 Oscillation frequency controller
2 Ventilation holes
3 On/off switch
4 Handle
5 Mains cable
6 Connection for dust extraction
7 Release button dust collection
box
8 Dust collection box lid
9 Tab for opening the dust collec-
tion box
10 Dust collection box
11 Adapter for external dust extrac-
tion
12 Orbital sander disc
13 Terminal strip for clamping sand-
paper
14 Clamping lever for clamping
sandpaper
15 Sander motor unit
16 Case
17 Eccentric grinder disc
18 Hand sander disc
19 2 sanding sheets for orbital
sander disc
20 2 sanding sheets for eccentric
grinder disc
21 2 sanding sheets for hand sand-
er disc
22 4 Phillips screws for mounting
the sanding disc
23 Movable mounting plate
24 Threaded bore
25 Marking
26 Felt ring
27 4 rubber pins
28 Mounting frame for lter insert
29 Filter insert for dust collection
box

Parkside PMFS 200 B2 Specifications

General

Brand	Parkside
Model	PMFS 200 B2
Category	Sander
Language	English