Parkside PMS 160 A1 User Manual (English)

Questions and Answers:

W
William MartinezAug 4, 2025
What to do if my Parkside Sander doesn't start?
- E
  Evelyn JacksonAug 4, 2025
  If your Parkside Sander doesn't start, it could be due to a few reasons. First, check the socket, mains cable, line, and mains plug to ensure they are working. Also, check the main circuit breaker. If any of these are faulty, repairs should be carried out by a qualified electrician. Alternatively, the on/off switch may be defective and require repair by Customer Care. It is also possible that the engine is faulty.
J
Jill HullAug 10, 2025
Why is the grinding performance of my Parkside Sander poor?
- G
  Gregory MurrayAug 10, 2025
  If you're experiencing poor grinding performance with your Parkside Sander, it might be due to using a sanding sheet unsuitable for the workpiece. Try using a more suitable sanding sheet or sanding disc. Also, check if the sanding sheet is worn and replace it with a new one.
E
ernest15Aug 16, 2025
Why does the sanding sheet on my Parkside PMS 160 A1 wear down quickly?
- I
  Isaac GillAug 17, 2025
  If the sanding sheet on your Parkside Sander wears down quickly, it could be because the sanding sheet is unsuitable for the workpiece you are processing. Try using a more suitable sanding sheet. Also, you might be applying too much pressure; reduce the pressure during sanding.
W
Walter JohnsonAug 22, 2025
What to do if the engine of my Parkside Sander slows down and stops?
- E
  Elizabeth BryantAug 22, 2025
  If the engine of your Parkside Sander is slowing down and stopping, it may be overloaded by the workpiece. Try reducing the pressure on the grinding tool. It is also possible that the workpiece is unsuitable.
A
Angela SmithAug 28, 2025
What to do if my Parkside PMS 160 A1 Sander works with interruptions?
- S
  Shawn ReynoldsAug 29, 2025
  If your Parkside Sander works with interruptions, it could be due to an internal loose contact, which requires repair by Customer Care. It is also possible that the on/off switch is broken.