What to do if my Parkside PHS 160 E5 doesn't start?
If your Parkside Sander isn't starting, it could be due to a missing mains voltage or a tripped main circuit breaker. Check the socket, mains cable, line, and mains plug, and ensure the main circuit breaker is working. Repairs may be needed. Another potential cause is a defective on/off switch, which would require repair by Customer Care. The engine might also be faulty.
Why does my Parkside PHS 160 E5 engine slow down and stop?
If the engine of your Parkside Sander slows down and stops, it could be due to overloading the device with the workpiece. Try reducing the pressure on the grinding tool. Another possibility is that the workpiece is unsuitable for the sander.
Why does my Parkside Sander have poor grinding performance?
Poor grinding performance with your Parkside Sander may be due to using a sanding sheet unsuitable for the workpiece. Try using a more appropriate sanding sheet. Another cause may be a worn sanding sheet.
Why is the sanding sheet wearing down so quickly on my Parkside Sander?
If the sanding sheet on your Parkside Sander wears down quickly, it may be unsuitable for the workpiece you are processing. Try using a more appropriate sanding sheet. Also, excessive pressure can cause rapid wear, so reduce the pressure applied.
What to do if the engine is slowing down and stops on my Parkside PHS 160 E5?
If your Parkside Sander engine is slowing down and stopping, it could be because the device is overloaded by the workpiece. Reduce the pressure on the grinding tool. Also, the workpiece may be unsuitable.
What to do if my Parkside PHS 160 E5 Sander works with interruptions?
If your Parkside Sander works with interruptions, it could be due to an internal loose contact, which requires repair by Customer Care. Also, the on/off switch may be broken.
Why is the grinding performance of my Parkside PHS 160 E5 poor?
Poor grinding performance with your Parkside Sander may stem from using an unsuitable sanding sheet for the material you're working with. Use a more appropriate sanding sheet or sanding disc. Also, check if the sanding sheet is worn and replace it with a new one.
Why does the sanding sheet wear down quickly on my Parkside Sander?
If the sanding sheet on your Parkside Sander wears down quickly, ensure you are using a suitable sanding sheet for the workpiece. Also, reduce the amount of pressure you are applying to the sander.
General| Power | 160 W |
|---|---|
| Weight | 1.2 kg |
| Cable length | 3 m |
| Dust extraction | Yes |
| Sanding sheet attachment | Hook and loop |
| Oscillation rate | 24000 opm |
Device designed for dry sanding of wood, metal, plastic, fillers and painted surfaces.
Explains device and manual symbols, plus general safety for power tools.
Details personal safety measures, alertness, and proper handling during operation.
Advises on professional service, workpiece securing, dry sanding, and avoiding overheating.
Covers safe practices for the work environment and electrical connections.
Guidelines for correct power tool application, maintenance, and dust extraction.
To Next Page