Parkside PHS 160 E5 - Cleaning and Maintenance; Filter Maintenance

G B IE
1 2
NI
and then wood).
• Empty the dust collection box or the
vacuum cleaner regularly in order to
ensure optimal suction.
Selection of sanding sheet
Grain size Application
P 60
P 80
for pre-sanding rough wood
surfaces
P 120
P 180
for plain sanding
P 240
     
painted surfaces
Choosing the right sanding
plate
Pre-mounted sanding plate:
• For sanding/grinding large surfaces
as well as corners, edges and outer
curves.
Sanding nger:
• For machining small slots and narrow
intermediate spaces.
Cleaning/Maintenance
Pull the mains plug before any ad-
justments, maintenance or repair.
Repair and servicing work not
described in this manual should
always be carried by our Service
Centre. Use only original parts.
    
   .    
long and reliable service life.
Cleaning
Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
      
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably damage
the appliance.
• Clean the sanding sheet with a vacuum
cleaner or knock it out.
Cleaning / replacing the
lter insert of the dust
collection box
        
for contamination.
Removingthelterinsert:
1. Press the release button (
4)
and pull the dust collection box
(
8   
removing/emptying the dust col-
lection box”).
2 Pull the tab (7) and remove the
dust collection box lid (6).
2. Pull the mounting frame (17) from
the dust collection box lid (6) and
    8.
3.     8 
warm water and soap and let it
dry.
Replace a heavily contaminated
    
 .
Installingthe ilterinsert:
4.     8 