G B IE
5
NI
General Description
functioning parts can be found
on the foldout page.
Scope of delivery
Carefully unpack the trimmer and check that
it is complete. Dispose of the packaging
material correctly.
• Device
• Dust box
• External dust extraction adaptor
• 3 sanding sheets (two-part)
8 2 8
3
8 2 8
• Instruction manual
Overview
1 On/off switch
2 Hand rest
3 Vent
4 Release button dust collection box
5 Mains cable
6 Dust collection box lid
dust collection box
8 Dust collection box
9 Connection for dust extraction
10 Sanding plate
11 External dust extraction adaptor
12 3 sanding sheets (two-part)
3
14 3 sanding sheets for sanding
15 Extraction holes for sandig plate
16 Clamping lever for unlocking san-
ding plate
18 Filter insert for dust collection
box
Technical Data
Detail sander .......................PHS 160 E5
Rated input voltage (U) ......230 V~, 50 Hz
Power input (P) ............................ 160 W
Idling speed (n
0
) ....................13000 min
-1
Oscillation rate (n) .................26000 min
-1
Weight (without accessories) ... appr. 1.1 kg
Protection class .................................
II
Protection category .......................... IPX0
Sound pressure level
(L
pA
) .......................76 dB(A);
pA
= 3 dB
Sound power level
(L
WA
) .....................8
WA
= 3 dB
Vibration (a
h
) ........... 9 m/s
2
;
.
2
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
also be used for a preliminary exposure
assessment.
Warning:
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).
To Next Page
Loading...
