26 GB/IE/NI
Note: The moisture measuring product switches
itself off automatically if the product is not used for
60 seconds approximately.
Put back the protective cap
1
. While putting back
the protective cap
1
, take care of groove and recess
on product & protective cover
1
.
Battery display
If the battery charge status is low, the low battery indi-
cator
11
appears on the display
8
. Please note that
while the batteries are low, the measured values will be
false or inaccurate. Replace the batteries as quickly as
possible if this display appears. The battery change is
d
escribed in the section “Inserting/changing the batteries“.
Temperature display
You can change the temperature display between
°C and °F by holding down M/°C/°F button
3
for
approximately 5 seconds.
To Next Page
