Parkside PRM 1300 A1 - Maintenance and Storage; General Maintenance and Storage; General Cleaning and Maintenance Work; Cleaning Procedures

10
IE NI CYGB
- When the equipment is out of
use,
- Before checking, cleaning or
working on the equipment,
- If the power cable is dam-
aged or frayed,
- when a foreign object has
been hit. Check for damage
to the lawnmower and carry
out the necessary repairs be-
fore switching on again and
working with the lawnmower.
- If the lawnmower starts to vi-
brate abnormally, an immedi-
ate check must be carried out.
- search for signs of damage;
- perform any necessary re-
pairs to damaged parts;
- make sure that all nuts,
bolts and screws are prop-
erly tightened.
• Do not place feet or hands near
or under rotating parts. Do not
stand in front of the grass ejec-
tion hole during sickle mowing.
• Do not run the engine if you are
facing the chute.
Maintenance and Storage:
• Ensure that all nuts, bolts and
screws are tightened rmly and
the equipment is in safe work-
ing condition.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specied in these
instructions is to be carried out
only by customer service centres
that we have authorised.
• Keep the equipment in a dry
location and out of reach of
children.
• Handle the equipment with
care. Keep tools sharp and
clean, in order to facilitate bet-
ter and safer work. Follow the
maintenance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass col-
lection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades,
take particular care to avoid n-
gers being trapped between the
rotating blades and xed parts
of the machine.
• Check that only replacement
tools authorised by the manu-
facturer are used.
• When servicing the cutting bla-
de on it that even if the voltage
source is switched off, the cut-
ting blade can be moved.
• Allow the motor to cool before
storing the equipment in a con-
ned space.
• Be aware that when using
machines with several cutting
blades, moving one cutting bla-
de can lead to the other blades
rotating.
• Replace worn or damaged
parts in the interests of safety.
Use only original spare parts
and accessories.
CAUTION! The following
states how to avoid accidents
and injuries due to electric
shock: