5
NI CYIEGB
18 Blade
19 Motor spindle
20 Level gauge
21 Wheel axle
22 Mulch kit
23 Carrying handle
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, safety switch,
collision guard, and grass box. Addition-
ally, the equipment is height adjustable to
three levels and has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
Technical
Specications
Electric Lawnmower ..PRM 1300 A1
Motor input power .................... 1300 W
Mains voltage .................230 V ~, 50 Hz
Idling speed ........................... 3500min
-1
Blade width ................................. 32 cm
Cut height ................... 20 / 40 / 60 mm
Protection class ................................
II
Protection type ............................... IP 24
Weight ........................... approx. 8.3 kg
Lawn box volume ............................. 30 l
Sound pressure specication
(L
pA
) ........................86 dB(A); K
pA
= 3 dB
Noise level specication (L
WA
)
measured ........ 90,0 dB(A); K
WA
= 1,85 dB
guaranteed ..............................92 dB(A)
Vibration on the handle
(a
h
) ...................... 4.0 m/s
2
; K= 2.0 m/s
2
General Description
Scope of Delivery
Carefully remove the equipment from the
packaging and check whether the follow-
ing parts are complete:
- Lawnmower and curved handle
with connection cable
- Lower bar
- Lawn box (in three parts)
- 2 screws to attach the bar
- 2 wing nuts and screws
for attaching the curved handle
- 2 holders to attach the
connection cable
- Instruction Manual
The mulch kit is not included in
delivery.
Overview
1 Curved handle
2 Wing nuts
3 Lower bar
4 Grass box
5 Wheels
6 Lawnmower housing
7 Collision guard
8 Cable holder
10 Release button
12 Start lever
13 Screws for lower bar
14 Screws for curved handle
15 Handle
16 upper part of grass box
17 Blade screw
To Next Page
Loading...
