EasyManua.ls Logo

Parkside PRR A1 - Storage, Cleaning; Disposal

Parkside PRR A1
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Note: the product has two spray-
ing modes:
straight spray
rotation spray
5. Press the trigger (1d) to set the
water jet as a straight spray.
6. First press the button (1c) and
then the trigger to set the water
jet as a rotation spray.
Note: press the trigger until you
hear it click to lock it in place.
Press the trigger again to release it.
7. Turn off the water supply by
closing the tap or by releasing
the trigger when you no longer
need the product.
Storage, cleaning
Incorrect handling of the prod-
uct may cause damage.
When not in use, always store
the product dry, clean, without
batteries and at room temper-
ature.
The product must be stored
completely dry and without
water residue to avoid mould
growth.
Clean the product with a slight-
ly dampened, lint-free cloth.
Do not use harsh cleaners,
brushes with metal or nylon
bristles or any sharp or me-
tallic cleaning items such as
knives, hard scrapers and the
like. These could damage the
surfaces.
IMPORTANT! Never clean the
product with harsh cleaning
agents.
Disposal
The accompanying symbol
indicates that this device
complies with Directive
2012/19/EU. This directive
indicates that you may not dis-
pose of this device along with
basic household waste at the end
of its useful life and instead must
hand it in to specifically designat-
ed collection sites, valuable
substance collection stations, or
waste disposal facilities. Look
after the environment and dis-
pose of waste properly.
GB/IE

Table of Contents

Related product manuals