To Next PageTo Next Page
Need help?Do you have a question about the Parkside PSBM 500 B3 and is the answer not in the manual?
General| Power | 500 W |
|---|---|
| Max. Torque | 12 Nm |
| Chuck Type | Keyless chuck |
| Drilling Capacity in Wood | 25 mm |
| Drilling Capacity in Concrete | 10 mm |
| Voltage | 230 V |
| Chuck Capacity | max. 13 mm |
| Battery Capacity | Not applicable (corded) |
Specifies the intended uses of the device for impact drilling, drilling, and screwing.
Provides an overview of the device's features, controls, and specifications.
Explains the meaning of warning and information symbols used in the manual.
Identifies and explains symbols found directly on the power tool.
Crucial safety guidelines for operating any power tool.
Specific safety precautions for using drilling machines.
Identifies potential hazards that may remain even with correct operation.
Instructions for attaching and positioning the auxiliary handle.
Procedure for setting the depth stop for precise drilling.
How to start, stop, and control the device's operation.
Method for setting the maximum speed before operation.
Procedure to change the drilling direction for screws.
How to switch between drilling and impact drilling modes.
Useful advice for efficient and effective use of the tool.
Steps for cleaning the drill and its components.
Information regarding the maintenance requirements of the device.
Defines the duration and conditions of the product guarantee.
Details the guarantee period and statutory rights for defects.
Specifies what is covered and excluded under the product guarantee.
