EasyManua.ls Logo

Parkside PTBM 500 A1 - User Manual

Parkside PTBM 500 A1
122 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BENCH PILLAR DRILL PTBM 500 A1
TISCHBOHRMASCHINE
Originalbetriebsanleitung
BENCH PILLAR DRILL
Translation of original operation manual
WIERTARKA STOŁOWA
Tłumaczenie oryginalnej instrukcji obsługi
STOLNÍ VRTAČKA
Překlad originálního provozního návodu
STOLOVÁ VŔTAČKA
Preklad originá lneho návodu na obsluhu
NAMIZNI VRTALNI STROJ
Prevod originalnega navodila za uporabo
ASZTALI FÚRÓGÉP
Az originál használati utasítás fordítása
IAN 102855
102855_par_Tischbohrmaschine_cover_PL_HU_SI_CZ_SK.indd 2 20.08.14 09:15

Table of Contents

Other manuals for Parkside PTBM 500 A1

Preview: Original Operation Manual
Original Operation Manual38 pages

Questions and Answers

  • T
    tayloraprilJul 31, 2025
    What to do if my Parkside PTBM 500 A1 doesn't start?
    • L
      Laura MartinJul 31, 2025
      If your Parkside Drill doesn't start, here are a few things to check: * First, make sure the emergency stop switch hasn't been triggered. Reactivate it by turning the switch, then press the on switch to restart the drill. * Next, check the socket, mains supply cable, cord, and mains plug. If there are any issues, have them repaired by a qualified electrician. Also, check the main fuse. * If these steps don't work, the on/off switch or the motor may be broken, and you should contact Customer Care for repair.
  • E
    Elizabeth FloresAug 15, 2025
    Why is my Parkside PTBM 500 A1 Drill vibrating so strongly?
    • K
      Kelly WoodsAug 15, 2025
      Strong vibrations in your Parkside Drill can be caused by a couple of things. First, check that the motor unit is fixed in place by inspecting the V-belt tension and tightening the locking screw. Secondly, ensure that the bit is centrally clamped in the drill chuck.

Summary

Introduction

Intended purpose

Describes the primary use and limitations of the bench drill for various materials and user types.

Technical Data

Notes on Safety

General Safety Instructions

Safe working

Provides essential guidelines for maintaining a safe working environment and practices during operation.

Safety Instructions for Box Column Drills

Assembly

Selecting the speed

Changing the Bit

Drilling

Switching on and off

Clamping the Workpieces

Cleaning and Servicing

Troubleshooting

Service-Center

Parkside PTBM 500 A1 Specifications

General IconGeneral
BrandParkside
ModelPTBM 500 A1
CategoryDrill
LanguageEnglish

Related product manuals