EasyManua.ls Logo

Parkside PTBM 400 A - User Manual

Parkside PTBM 400 A
176 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Perceuse d’établi
Traduction des instructions d‘origine
Tafelboormachine
Vertaling van de originele gebruiksaanwijzing
Stolní vrtačka
Překlad originálního provozního návodu
Tischbohrmaschine / Bench Pillar Drill / Perceuse
détabli PTBM 400 A1
Bench Pillar Drill
Translation of the original instructions
Wiertarka stołowa
Tłumaczenie oryginalnej instrukcji obsługi
Stolová vŕtačka
Preklad originálneho návodu na obsluhu
IAN 373868_2104
Bænkboremaskine
Oversættelse af den originale driftsvejledning
Taladro de columna
Traducción del manual de instrucciones original
Tischbohrmaschine
Originalbetriebsanleitung

Table of Contents

Questions and Answers

  • M
    Michael BarkerAug 6, 2025
    Why my Parkside PTBM 400 A doesn't start?
    • T
      travis97Aug 6, 2025
      If your Parkside Drill isn't starting, there could be several reasons. First, check the socket, mains supply cable, cord and mains plug to ensure they are working. If needed, have them repaired by a qualified electrician. Also, check the main fuse. If the on/off switch is defective or the motor is faulty, it needs repair by Customer Care.
  • C
    Caroline TannerAug 13, 2025
    What to do if my Parkside PTBM 400 A has strong vibrations?
    • S
      Samantha ButlerAug 13, 2025
      If your Parkside Drill is vibrating strongly, it could be due to the motor unit not being fixed in place. Check the V-belt tension and tighten the locking nuts. Another cause might be that the bit is not centrally clamped in the drill chuck. Check the bit in the drill chuck.
  • C
    Christopher SnyderAug 21, 2025
    Why does my Parkside Drill make a loud squeaking noise?
    • B
      Barbara CannonAug 21, 2025
      A loud squeaking noise in your Parkside Drill can be caused by several factors. The V-belt tension might be too high, so check it. Also, inspect the V-belts for damage. Damaged pulleys can also cause this issue, so check them as well.
  • T
    tony30Aug 29, 2025
    How to fix laser on Parkside PTBM 400 A when it does not work?
    • S
      sanchezmatthewAug 29, 2025
      If the laser on your Parkside Drill isn't working, the batteries are likely empty. Replace the batteries.

Summary

Introduction

Intended Purpose

General Description

Extent of the Delivery

Lists all items included in the package.

Description of Functions

Explains the functions of the device's parts.

Component Overview

Illustrates and labels the main functional components of the drill.

Technical Data

Notes on Safety

Symbols and Icons

Explains symbols used on the device and in the manual.

General Safety Directions

Work Area Safety

Guidelines for maintaining a safe work environment.

Electrical Safety

Personal Safety

Power Tool Use and Care

Safety Information for Drills

Safety Instructions for Handling the Laser

Safety Instructions for Handling Batteries

Assembly

Operation

Setting Up

Instructions for positioning and securing the bench drill.

Selecting the Speed

Procedure for adjusting the V-belt for desired speed.

Checking the V-belts

Guidance on inspecting V-belt tension and condition.

Tensioning the V-belts

Adjusting the Drilling Bench

Preselecting the Drilling Depth

Changing the Bit

Drilling Operation

Adjusting the Laser

Inserting;Replacing Laser Batteries

General Information

Clamping the Workpieces

Removing Blockages

Cleaning and Maintenance

Cleaning

Instructions for cleaning the drill after use.

Storage

Transport

Waste Disposal and Environmental Protection

Replacement Parts and Accessories

Troubleshooting

Guarantee

Guarantee Cover

Details on what the guarantee covers and its limitations.

Guarantee Period and Statutory Claims for Defects

Information on the guarantee duration and user's legal rights.

Processing in Case of Guarantee

Steps to follow for efficient guarantee claims.

Service Center

Importer Information

Exploded Drawing and Parts List

Parkside PTBM 400 A Specifications

General IconGeneral
Power400 W
Chuck TypeKeyless Chuck
Max Drill Diameter in Wood25 mm
Max Drill Diameter in Steel10 mm
Max Drill Diameter in Concrete10 mm
Chuck Capacity1.5 - 13 mm
Chuck Size13 mm
Cable Length2 m

Related product manuals