Parkside PTBM 400 A User Manual

25
GB IE
Pull out the mains plug.
Notice symbol with information on
how to handle the device properly.
Caution! Hot surface. There is a
risk of burns.
Steel
Wood
General Safety Directions
forPower Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock,  re and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool“ in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of  ammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
Wear ear protection
Wear eye protection
Do not wear long hair uncovered.
Use a hair net.
Do not wear gloves.
Caution! Risk of injury from rotating
parts!
Electrical machines do not belong
with domestic waste
Caution! - Laser beam
Do not look into the beam!
Laser class 2
(U/min):Ø (mm):Ø (mm):
< 3
3 - 4
5
> 8
6 - 8
< 4
5 - 6
7 - 8
9 - 10
> 10
900
600
2650
1800
1300
Speed table
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol with information
on prevention of harm / damage.
Connect the machine to the power
supply.

Parkside PTBM 400 A Specifications

General

Power	400 W
Chuck Type	Keyless Chuck
Max Drill Diameter in Wood	25 mm
Max Drill Diameter in Steel	10 mm
Max Drill Diameter in Concrete	10 mm
Chuck Capacity	1.5 - 13 mm
Chuck Size	13 mm
Cable Length	2 m