What to do if my Parkside Drill doesn’t start?
If your Parkside Drill doesn't start, it could be due to several reasons. First, check the socket, mains supply cable, cord, and mains plug for any issues and have them repaired by a qualified electrician if needed. Also, verify the main fuse. A defective on/off switch or a faulty motor could also be the cause, requiring repair by Customer Care.
Why is my Parkside PTBM 400 B1 making a loud squeaking noise?
A loud squeaking noise in your Parkside Drill can be caused by a few things. The V-belt tension might be too high, so check it. Also, inspect the V-belts for any damage. Finally, check the pulleys for any damage as well.
Why is my Parkside PTBM 400 B1 Drill vibrating so strongly?
Strong vibrations in your Parkside Drill can be attributed to a couple of issues. First, ensure that the motor unit is securely fixed in place by checking the V-belt tension and tightening the locking nuts. Secondly, make sure the bit is centrally clamped in the drill chuck.
How to fix the laser on my Parkside PTBM 400 B1 Drill?
If the laser on your Parkside Drill isn't working, the batteries might be empty. Replace the batteries.
Lists all items included in the product packaging.
Explains the functions of the different components of the device.
Identifies and lists the numbered parts of the bench pillar drill.
Explains symbols displayed directly on the tool.
Explains symbols used within the manual text.
Provides essential safety guidelines for using power tools.
Provides extra safety advice beyond the general sections.
Specific safety guidelines for using the laser feature.
Guidelines for safe insertion, use, and disposal of batteries.
Instructions for placing and securing the bench drill on a surface.
Steps to choose the appropriate rotation speed for drilling.
Instructions for cleaning the device after use.
Steps to safely clear jams or obstructions during operation.
Details the conditions and duration of the product guarantee.
Explains the guarantee period and consumer rights.
Specifies what the guarantee covers and what it excludes.
Provides instructions on how to claim under the guarantee.
General| Power | 400 W |
|---|---|
| Drill chuck | Keyless chuck |
| Weight | 1.5 kg |
| Max. drilling diameter in steel | 10 mm |
| Max. drilling diameter in concrete | 10 mm |
| Chuck capacity | 1.5 - 13 mm |
| Chuck size | 13 mm |
| Cable length | 2 m |
| Impact rate | 0-48000 bpm |
| Max. drilling diameter in wood | 25 mm |
To Next Page