Parkside PSSA 4 B2 - Translation of the Original EC Declaration of Conformity

GB IE NI CY
Translation of the original
EC declaration of conformity
We declare that the unit
Cordless Screwdriver
model PSSA 4 B2
Serial number: 000001 - 350366
conforms with the following applicable relevant version of the EU guidelines:
2006/42/EC • 2014/30/EU
2011/65/EU* & (EU)2015/863
2014/30/EU • 2014/35/EU
2011/65/EU & (EU) 2015/863*
In order to guarantee consistency, the following harmonised standards as well as na-
tional standards and stipulations have been applied:
Equipment Battery charger/Power supply unit
EN 62841-1:2015 • EN 62841-2-2:2014
EN 55014-1:2017 • EN 55014-2:2015
EN 62471:2008 • EN IEC 61000-3-2:2019
EN 61000-3-3:2013/A1:2019
EN IEC 63000:2018
EN 60335-2-29:2004+A2:2010+A11:2018
EN 60335-1:2012+A11:2014+A13:2017
EN 55014-1:2017 • EN 55014-2:2015
EN 61000-3-2:2014 • EN 61000-3-3:2013
EN IEC 63000:2018 • EN 62233:2008
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
GERMANY
10.03.2021
* TheobjectofthedeclarationdescribedabovesatisestheprovisionsofDirective2011/65/EU
oftheEuropeanParliamentandtheCouncilof8June2011onlimitingtheuseofcertainharmful
substances in electrical and electronic appliances.
** ThelasttwodigitsoftheyearinwhichtheCEmarkingwasafxed.
Christian Frank
Documentation Representative
43