To Next PageTo Next PageWhy my Parkside Power Tool won't start?
If your Parkside Power Tool won't start, first ensure the battery (22) is properly inserted. If it is, the battery may be discharged, so recharge it. If the issue persists, the On/Off switch (2) may be defective, requiring repair at a service center. It is also possible that the motor is defective.
Why does the saw blade quickly become blunt on my Parkside Power Tool?
If the saw blade of your Parkside Power Tool becomes blunt quickly, it might be because the saw blade (16/17) is unsuitable for the workpiece; insert a suitable saw blade (16/17). Also, you might be applying too much pressure; reduce the pressure. Finally, the sawing speed might be too high; reduce the sawing speed.
What to do if saw blade quickly becomes blunt on Parkside Power Tool?
General| Battery Voltage | 20 V |
|---|---|
| Stroke Rate | 0-2700 min⁻¹ |
| Cutting Depth in Metal | 10 mm |
| Cutting Depth in Steel | 10 mm |
| Pendulum Settings | 4 |
| Battery Type | Lithium-Ion |
| Bevel Angle | 0–45° |
Device is suitable for straight, curved, and mitre cuts on wood, plastic, and light metal.
Provides essential safety guidelines for operating power tools safely.
Ensures a clean, well-lit environment and prohibits operation in explosive atmospheres.
Covers plug compatibility, avoiding body contact with earthed surfaces, and using outdoor extension cords.
Emphasizes staying alert, using PPE, preventing unintentional starting, and proper handling.
Instructs on not forcing the tool, using the correct tool, and keeping handles dry and clean.
Details safe charging, use of compatible batteries, and precautions for battery handling.
Specific safety advice for sabre saw operation, including handling and workpiece security.
