To Next Page
W
williamsmarioJul 29, 2025
Why does my Parkside PWD 20 B2 have weak suction?
- GGreg LambertJul 29, 2025
Weak suction in your Parkside Vacuum Cleaner can occur due to several reasons. The suction hose or nozzles might be blocked; clear any obstructions. Ensure the suction pipe is correctly assembled. The dirt container may be full, so empty it. Also, the filter could be full or clogged; clean, empty, or replace it. If the float in the filter basket is in the wrong position, turn off the device to allow the float to sink, then switch it back on.
General
