Parkside X 18 V User Manual

Kompernaß GmbH
Burgstraße 21
44867 Bochum (Germany)
BATTERY OPERATED
DRILL SCREWDRIVER
GB / IE / CY Operation and Safety Notes Page 5
BATTERY OPERATED DRILL
SCREWDRIVER
Operation and Safety Notes
Last Information Update: 03/ 2008 · Ident.-No.: X18V032008-6
X18V
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions
of the device.

Parkside X 18 V Specifications

General

Brand	Parkside
Model	X 18 V
Category	Power Screwdriver
Language	English

Summary

Introduction

Equipment Components

Wear Ear Protection

Highlights the importance of wearing hearing protection due to potential noise levels during operation.

General Safety Advice for Electrical Power Tools

Workplace Safety

Electrical Safety

Precautions to avoid electric shock hazards, including mains connection and water exposure.

Personal Safety

Recommendations for operator protection, including alertness, protective equipment, and avoiding hazardous conditions.

Careful Handling and Use of Electrical Power Tools

Careful Handling and Use of Rechargeable Devices

Specific guidance for safely charging, storing, and handling rechargeable battery units.

Safety Advice Relating to Cordless Drill Drivers

Safety tips specific to the operation of cordless drill drivers, including torque and kickback.

Attention - Service Lines!

Warning about potential hazards when drilling near electrical, gas, or water service lines.

Before First Use

Charging the Battery Pack

Detailed steps for charging the battery pack before its initial or renewed use.

Insertion/Removal of a Battery Pack into the Appliance

Changing Tools

Torque Pre-selection

2 Gear Drive

Preparing the Tool for Use

Switching ON/OFF

Adjusting the Speed

Cleaning and Maintenance

Disposal