10
Use of "3 in 1" Detergent Tablets
General Advice
1. Before using these products you should first check that the water hardness is compatible
with the use of these products as per the detergent manufacturer’s instructions (on the
product packaging).
2. These products should be strictly used according to the detergent manufacturer’s
instructions.
3. If you encounter problems when using "3 in 1" products for the first time then please
contact the detergent manufacturers care line (the telephone number is given on the
product packaging).
These products are detergents with integrated and combined detergent/rinse aid functions.
4. Detergent tablets of different brands dissolve at different speeds. For this reason some
detergent tablets cannot dissolve and develop their full cleaning power during short wash
programmes. We recommend selecting long wash programmes when using tablets, to
ensure optimum efficiency and complete removal of detergent residues.
To select “3 in 1” function:
1. Close the door and select the 3 in 1 washing cycle by pressing the option button “3 in
1” until the “3 in 1” indicator lights
2. The 3 in 1 washing cycle will be available after pressing the start/pause button and
the “3 in 1” indicator lights.
To cancel "3 in 1" function:
Follow the 'Cancelling a programme in progress' instructions.
If you decide to switch to the use of a standard detergent system we advise that you:
1. Refill the rinse aid compartments.
2. Switch the rinse aid setting to the highest possible position and run for three normal
cycles without load.
3. Readjust the rinse aid setting again according to the conditions for your region
NOTE: please place 3in1 tablet in the cutlery basket
To Next Page
