What to do if my Parmco PD6-PSL has suds in the tub?
If you find suds in the tub of your Parmco Dishwasher: * Ensure you are using the correct dishwasher detergent to avoid suds. * Open the dishwasher and allow the suds to evaporate. * Add 1 gallon of cold water to the tub. * Close and latch the dishwasher, then select any cycle. * After draining has stopped, open the door and check if the suds have disappeared.
Why is my Parmco Dishwasher not drying properly?
If your Parmco Dishwasher isn't drying dishes adequately: * Ensure you are using enough rinse-aid and refill the rinse-aid dispenser if necessary. * Avoid emptying the dishwasher immediately after washing; instead, open the door slightly to allow steam to escape. * Begin unloading the dishwasher once the dishes are barely warm to the touch. * Empty the lower basket first. * If using a short program, select a program with a longer washing time, as shorter programs use lower washing temperatures.
Why is there cloudiness on glassware in my Parmco Dishwasher?
Cloudiness on glassware from your Parmco Dishwasher could be due to: * Using too much detergent with soft water: Reduce the amount of detergent if you have soft water. * Detergent left in dispenser cups: Reposition dishes that may be blocking the detergent cups. * The wrong program being selected: Choose appropriate program.
What causes black or grey marks on dishes in my Parmco PD6-PSL Dishwasher?
Black or grey marks on dishes from your Parmco Dishwasher are likely caused by aluminum utensils rubbing against the dishes. Use a mild abrasive cleaner to eliminate these marks.
What does Error Code E4 mean on my Parmco PD6-PSL Dishwasher?
If your Parmco Dishwasher displays Error Code E4, and overflow occurs, turn off the main water supply before calling for service.
Why won't my Parmco PD6-PSL start?
Your Parmco Dishwasher might not start due to several reasons: * A blown fuse or triggered home circuit breaker: Replace the fuse or reset the circuit breaker. * The dishwasher isn't turned on or the door isn't closed properly: Ensure the dishwasher is on and the door is securely closed and latched. * The power cord isn't properly plugged in: Make sure the power cord is correctly inserted into the wall socket. * The water supply isn't connected properly or turned on: Verify the water supply connection and ensure the water is turned on. * There's a kink in the drain hose: Inspect the drain hose. * The filter is clogged: Check and clean the filter. * The kitchen sink is clogged: Ensure the kitchen sink is draining well. * You're using improper detergent: Use only special dis...
What to do if my Parmco PD6-PSL has an unsatisfactory washing result?
If your Parmco Dishwasher isn't cleaning dishes well enough, consider the following: * The selected program may not be strong enough: Try a more intensive program. * Not enough detergent was used: Increase the amount of detergent or switch to a different detergent. * Items are blocking the spray arms: Rearrange the dishes so the spray arms can rotate freely. * The filter combination is dirty or incorrectly fitted: Clean and correctly fit the filter combination. * The spray arm jets may be blocked: Clean the spray arm jets. * Too much detergent is being used with soft water: Reduce the amount of detergent if you have soft water and select a shorter cycle. * Aluminum utensils have rubbed against dishes: Use a mild abrasive cleaner to remove the marks. * Dishes are improperly...
Ensures safety by providing a path of least resistance for electric current in case of malfunction.
Guidelines for safe operation, including warnings about door use, loading, and child supervision.
Details on buttons, indicators, and the LED display screen for operating the dishwasher.
Instructions on filling and the function of the rinse aid dispenser.
Step-by-step guide to starting a wash cycle, including loading and program selection.
Description of the filter system and instructions for cleaning the filter assembly.
Warnings and requirements for electrical connection, including grounding.
Instructions for connecting the cold water supply hose to the appliance.
Procedure for connecting the drain hose to a drain pipe or sink, including height limits.
Troubleshooting for issues like the dishwasher not starting or water not being pumped.
Troubleshooting for dishes not clean, cloudiness, marks, and improper drying.
Explanation of error codes displayed by the appliance and their possible causes.
General| Category | Dishwasher |
|---|---|
| Model | PD6-PSL |
| Type | Freestanding |
| Place Settings | 14 |
| Energy Rating | 3.5 Stars |
| Noise Level | 49 dB |
| Programs | 6 |
| Delay Start | Yes |
| Child Lock | Yes |
To Next Page
