What to do if no sound is coming through my Parrot PARTY speakers?
If you're not getting any sound from your Parrot PARTY speakers, first ensure that the device is switched on using the ON/OFF switch located on the back and that it has sufficient power. Also, verify that your device supports the Bluetooth A2DP profile and source role.
Why is the center LED on my Parrot PARTY speakers red?
A red LED on your Parrot PARTY indicates that the battery is low, with less than 15 minutes of battery life remaining. To resolve this, plug your Parrot PARTY into a power outlet. The LED will turn violet while charging and then blue when fully charged.
General| Type | Portable speakers |
|---|---|
| Speakers | 2 |
| Compatibility | A2DP. SBC. |
| Bass optimization | Yes |
| Dimensions (WxDxH) | 228 x 79 x 85 mm |
| Minimum system requirements | Parrot 5 208MHz. RAM 8 MB or Flash 4 MB. |
| Audio output channels | 2.0 channels |
| Frequency range | 120 Hz – 18 KHz Hz |
| RMS rated power | 6 W |
| Amplifier output power | D W |
| Battery life (max) | 4 h |
| Battery technology | Nickel-Metal Hydride (NiMH) |
Weight and Dimensions| Weight | 620 g |
|---|
Guidelines for safe operation, handling, and avoiding hazards.
Precautions regarding temperature, moisture, and lightning.
Procedure for connecting to audio players using Bluetooth.
Steps to authenticate and pair the device with a Bluetooth audio player.
To Next Page
