Parrot Zik-2 User Manual

ENGLISH
8
Music
Note : The touch sensitive panel is located on the right side.
Connecting the Parrot Zik 2.0 to the audio source
Connect the Jack to Jack cable supplied to the Parrot Zik 2.0’s right headphone and
connect the other end to your audio player. If your telephone / Bluetooth® audio
player supports Bluetooth® A2DP, you can also send music to your Parrot Zik 2.0 via
Bluetooth®.
Volume
To increase the volume, swipe your finger upward on the touch sensitive panel. To
decrease the volume, swipe your finger downward on the touch sensitive panel.
Next / previous
If your audio player is connected to the Parrot Zik 2.0 via Bluetooth®:
ͻ To return to the previous track, swipe your finger backward on the touch sen-
sitive panel.
ͻ To move to the next track, swipe your finger forward on the touch sensitive
panel.
Pause / Play
To pause the music, take o the headset or tap the touch sensitive panel.
To start playing again, put the headset back on or tap the touch sensitive panel once
more.

Parrot Zik-2 Specifications

General

Brand	Parrot
Model	Zik-2
Category	Headsets
Language	English