4. Hold the rear handle and tilt the engine
up fully until the tilt support lever
automatically locks.
2.11.2 Tilting down
1. Slightly tilt the outboard motor up.
2. Slowly tilt the outboard motor down
while pulling the tilt support bar lever
up.
1. tilt support bar lever
1
3. Loose the steering friction adjuster by turning it counterclockwise, and adjust the steering friction
according to operator preference.
WARNING:
z If there is too much resistance it could
be difficult to steer, which could result
in an accident.
25
To Next Page
Loading...
Need help?
General
