3
TABLE OF CONTENTS
PAGE NUMBER
SECTION 1 - OVERVIEW 5
1.1 Display 5
1.2 Control 5
1.3 Alarms 5
1.4 Digital Communications 5
1.5 Power Input 5
SECTION 2 - INSTALLATION & WIRING 6
2.1 Unpacking 6
2.2 Location / Mounting 6
2.3 Preparation for Wiring 8
2.4 Wiring Connections 11
SECTION 3 - NORMAL OPERATION 15
3.1 Changing The Chart 15
3.2 Control Output Settings 15
3.3 Alarm Settings 16
3.4 High/Low Limits 16
SECTION 4 - RECORDER SETUP, TEST, AND CALIBRATION 16
4.1 Hardware Selections - Input Jumper Positions 17
4.2 Recorder Programming 17
4.3 Test Mode 20
SECTION 5 - RECORDER CALIBRATION MODE 21
5.1 Input Calibration 21
5.2 Chart/Pen Calibration 22
SECTION 6 - MODEL NUMBER CHANGES 23
APPENDICES
A - Model Number Hardware Matrix Details 24
B - Specifications 25
Warranty 31
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...