Partner BV24 User Manual

INSTRUCTION MANUAL
IMPORTANT INFORMATION
: Please r ead these instructions carefully and make
sure you understand them before using this unit. Retain these instructions for future
reference.
530163813 1/29/03
MANUEL D’INSTRUCTIONS
RENSEIGNEMENTS IMPORTANTS:
Avant d’utiliser cet appareil, veuillez lire
atentivement les instructions et assurez--vous de les avoir comprises. Conser vez
les instructions pour référence ultérieure.
BETRIEBSANWEISUNG
WICHTIGE INFORMATION:
Lesen Sie diese Hinweise zur Handhabung des
Geräts aufmerksam durch. V er w enden Sie es erst, wenn Sie sicher sind, daß Sie
alle Anweisungen verstanden haben und gut aufbewahr en.
MANUAL DE INSTRUCCIONES
INFORMACIÓN IMPORTANTE:
Lea atentamente las instrucciones y
asegúrese d e entenderlas antes de utilizar esta aparato. Conserve las instruc-
ciones para la referencia en el futuro.
BV24
GB
FR
DE
ES
LIBRETTO D’ISTRUZIONI
INF ORMA ZIONI IMPO RTANTI
: Siete pregati di leggere attentamente questo
istruzioni e prendere dimestichezza con il prodotto prima di usario. Mantenga
queste istruzioni per riferimento futuro.
IT
NL
HANDLEIDING
BELANGRIJKE IMPORTANTS:
Lees deze instructies zorgvuldig en wees er
zeker van dat uze begrijpt alvorens de blower te gebrulken en bewaar ze voor
toekomstige raadpleging.

Partner BV24 Specifications

General

Brand	Partner
Model	BV24
Category	Blower
Language	English

Summary

Instruction Manual

Safety Rules

Know Your Unit

Plan Ahead

Fuel and Safe Operation

Handle Fuel With Caution

Eliminate spark sources, mix/pour fuel outdoors, don't smoke, ensure unit is assembled, don't refuel hot engine, wipe spills.

Operate Your Unit Safely

Stop engine before opening inlet door, inspect unit, keep surfaces clean, never start in closed rooms, avoid static shock.

Assembly

Blower Tube Assembly

Vacuum Bag Assembly

Assembly Procedures

Vacuum Tube Assembly

Convert Unit From Vacuum to Blower Use

Remove vacuum tubes using screwdriver to release latch, then remove bag and reinstall blower tube.

Operation

Starting Procedures

Before Starting the Engine

Ensure tubes are secure, fuel unit, hold unit correctly, and avoid debris pickup.

Starting a Cold Engine

Set throttle/choke, prime bulb, pull rope until engine runs, adjust choke, run for 30 seconds.

Starting a Warm Engine

Set throttle, pull rope until engine runs. If not started, pull 5 more pulls. If still not running, it's likely flooded.

Starting a Flooded Engine

Place choke in RUN, set throttle to fast, pull rope until engine starts, then move throttle to slow to idle.

Maintenance

Clean Air Filter

Replace Spark Plug

Muffler and Screen Maintenance

Inspect Muffler and Spark Arresting Screen

Storage

Internal Engine Storage

Troubleshooting