Partner GBV 345 User Manual

INSTRU CTI ON MANUAL
IMPOR TANT INFORMATION
: Please read these instructions carefully and make
sure you understand them before using this unit. Retain these instructions for future
reference.
115353827 Rev. 2 2/22/10 BRW
MANUEL D’INSTRUCTIONS
RENSEIGNEMENTS IMPORTANTS:
Avant d’utiliser cet appareil, veuillez lire
atentivement les instructions et assurez--vous de les avoir comprises. Conservez
les instructions pour référence ultérieure.
BETRIEBSANW EISUNG
WICH TIGE INFORMATI ON:
Lesen Sie diese Hinweise zur Handhabung des
Geräts aufmerksam durch. Verwenden Sie es erst, wenn Sie sicher sind, daß Sie
alle Anweisungen verstanden haben und gut aufbewahren.
MANUAL DE INSTRUCCIONES
INFORMACIÓN IMPORTANTE:
Lea atentamente las instrucciones y
asegúrese de entenderlas antes de utilizar esta aparato. Conserve las instruc-
ciones para la referencia en el futuro.
GB
FR
DE
ES
LIBRETTO D’I STRUZI O NI
INFORMAZIONI IMPOR TANTI
: Siete pregati di leggere attentamente questo
istruzioni e prendere dimestichezza con il prodotto prima di usario. Mantenga
queste istruzioni per riferimento futuro.
IT
NL
HANDLEIDING
BELANGRIJKE IMPORTANTS:
Lees deze instructies zorgvuldig en wees er
zeker van dat uze begrijpt alvorens de blower te gebrulken en b ewa ar ze voor
toekomstige raadpleging.

Partner GBV 345 Specifications

General

Brand	Partner
Model	GBV 345
Category	Blower
Language	English

Summary

Instruction Manual Introduction

Important Information

Read and understand these instructions carefully before using the unit for future reference.

Safety Symbols and Guidelines

Key Symbols Explained

Visual indicators for safe operation, protective gear, and potential hazards.

Core Safety Rules

Covers unit knowledge, area inspection, safe usage, and planning ahead.

Safe Usage and Maintenance

Fuel Handling and Safety

Guidelines for safe mixing, pouring, storage, and use of fuel.

Operational Safety

Covers unit inspection, operation environment, safe usage, and hazard avoidance.

Routine Maintenance

Covers air filter cleaning, spark plug, fuel filter, and storage preparation.

What Is What?

Component Identification

Lists and identifies all parts of the blower unit.

Assembly Instructions

Carton Contents and Unit Assembly

Check carton contents and follow initial assembly steps for the blower unit.

Blower Tube Assembly

Instructions for connecting the blower tubes to the unit.

Vacuum Assembly

Vacuum Bag and Elbow Tube

Steps to assemble the vacuum bag and attach the elbow tube.

Vacuum Tube Assembly

Procedure for removing and installing the vacuum inlet cover.

Unit Conversion and Strap Adjustment

Convert from Vacuum to Blower

Steps to reconfigure the unit from vacuum mode to blower mode.

Shoulder Strap Adjustment

Guidance on properly adjusting the shoulder strap for comfort and safety.

Operation

Operating Position

Illustrates correct posture for blower and vacuum operation.

Before Starting Engine

Pre-operation checks including fueling and safety precautions.

Fueling Engine

Instructions for mixing and handling fuel for the engine.

Starting the Engine

Starting a Cold Engine

Procedure for starting a cold or recently run-out-of-fuel engine.

Starting a Warm Engine

Procedure for starting an engine that has recently been turned off.

Starting a Flooded Engine

Steps to start an engine that may be flooded.

Maintenance Procedures

Checking Fasteners and Parts

Inspect for loose or worn fasteners and damaged parts.

Cleaning the Air Filter

Instructions for cleaning and maintaining the air filter for optimal performance.

Replacing Spark Plug

Procedure for replacing the spark plug to ensure easy starting.

Replacing Fuel Filter

Steps to replace the fuel filter.

Storage and External Surfaces

Preparing Unit for Storage

Steps for safely preparing the unit for long-term storage.

Cleaning External Surfaces

Guidance on cleaning and oiling external metal surfaces before storage.

Troubleshooting and Compliance

Troubleshooting Table

Common problems, their causes, and recommended remedies.

EC Declaration of Conformity

Statement of compliance with EU directives for machinery and EMC.

Technical Data

Engine Specifications

Details on engine displacement, power, and idle speed.

Noise Emissions

Reported sound power levels for the machine.

Sound Levels at Operator

Equivalent sound pressure levels measured at the operator's ear.

Vibration Levels

Equivalent vibration levels measured at the handles.