Partner K1250 Active User Manual

Explains symbols specific to the power cutter itself.

Details symbols used within the operator's manual.

Covers reading the manual, assembly, carburetor settings, and dealer checks.

Addresses modifications, material hazards, and California emissions compliance.

Details warranty rights and obligations regarding emission control.

Lists essential head, ear, and eye protection gear.

Specifies the need for breathing masks and heavy-duty gloves.

Covers protective clothing, leg protection, and anti-slip boots.

Recommends having a first aid kit readily available.

Explains the function of the anti-vibration system for user comfort.

Details the use of the stop switch to shut off the engine.

Warns about hot mufflers and covers regular checks and maintenance.

Instructs on regular checks for cracks or deformation of anti-vibration elements.

Guides on testing the stop switch functionality.

Emphasizes checking the blade guard's fit and condition before operation.

Stresses reading the manual, using trained specialists, and avoiding operation under influence.

Details secure storage and removing the blade for transport.

Warns against using a defective guard or damaged blade.

Covers care during fuel handling, ventilation, spill cleanup, and safe refueling.

Covers working area, footing, avoiding obstacles, and body contact with the blade.

Specifies a safety distance, how to hold the cutter, and starting cuts at full throttle.

Describes potential nerve and blood-vessel injuries from prolonged vibration exposure.

Guides on workpiece support, blade handling, and preventing kickback.

Explains water cooling benefits and how to sharpen diamond blades.

Explains pull-in, pinching, and the need to dry the blade after use.

Recommends checking drive shaft speed and covers proper storage of the cutter and blades.

Warns about blade bursting and introduces abrasive and diamond blades.

Details abrasive blade composition, reinforced blades, and suitable materials.

Advises checking the guard and blade for damage and proper fit.

Details diamond blade composition, applications, water cooling, and usage precautions.

Identifies and labels various parts of the power cutter with numbered references.

Details fitting the cutting head, drive belt, and belt tensioning.

Provides steps for fitting the cutting blade, flange washers, and tightening torque.

Explains blade guard fitting and inspecting the drive shaft and flanges.

Explains fuel mixture requirements, gasoline types, and octane ratings.

Specifies recommended oil and provides instructions for mixing fuel.

Lists precautions for safe refueling, including ventilation and moving the machine.

Covers starting precautions, fitted components, and the cold start procedure.

Explains starting a warm engine and how to stop the engine using the stop switch.

Details how to tension and replace the drive belt.

Warns against starting the engine with the belt pulley and clutch removed.

Explains carburetor operation and adjustments for high-speed and low-speed jets.

Guides on adjusting the idling speed screw for correct engine operation.

Advises on fuel filter checks, replacement frequency, and protection from contamination.

Details cleaning and oiling the main foam filter and replacing the paper back-up filter.

Provides instructions on replacing a broken or worn starter cord.

Details recoil spring replacement and fitting the starter unit correctly.

Mentions the ignition system and covers spark plug maintenance, gap, and replacement.

Advises on cleaning cooling fins and emphasizes muffler condition.

Lists essential daily checks for safety components, filters, blade, and fasteners.

Outlines weekly checks (spark plug, cooling fins) and monthly checks (clutch, filters, cables).

Lists engine specs like volume, bore, stroke, speeds, and ignition system details.

Specifies carburetor type, fuel capacity, weight, and cutting blade technical data.

Warns about chemicals in dust from construction activities causing cancer and birth defects.