To Next PageTo Next Page
Need help?Do you have a question about the Partner K650 ACTIVE II EPA and is the answer not in the manual?
Warning regarding the use of approved cutting wheels for high-speed cutters.
General safety warning: the power cutter can be dangerous.
Description of the stop switch operation.
General safety warnings about cutter dangers, dust, and sparks.
Safety regarding operator condition, attire, and essential protective gear.
Safety for fuel handling, work area, bystanders, and machine operation.
Safety regarding machine condition, carrying, and handling.
Specific safety rules: ventilation, training, asbestos, dust binding, servicing.
Instructions for reversing the cutting arm by 180 degrees.
Identification of cutter disc, guard, and adjustment knob.
Identification of stop switch, choke, starter, and throttle controls.
Identification of air filter, spark plug, and related components.
Critical safety warning: Never operate without the wheel guard.
Instructions on how to adjust the wheel guard.
Instructions for replacing the drive belt.
Information on cleaning and replacing the fuel filter.
Information on engine lubrication and recommended fuel type.
Details on oil mixture ratio and safe fuel container use.
Description of stop switch and choke button operations.
Description of starter and throttle control functions.
Critical safety warning: Cutting wheel rotates upon engine start.
Procedure for choke operation during engine starting.
Instructions for installing the starter pulley and cord.
Procedure for final starter assembly and function testing.
Safety warning about the tension of the recoil spring.
Requirement to wear protective eyewear during spring replacement.
Description of the air filter system components.
Procedure for removing and replacing the main air filter.
Instructions for cleaning and replacing the protective filter.
Warning about potential engine damage from improper filter maintenance.
Explanation of the carburetor's built-in governor function.
Explanation of the carburetor's fixed jets for fuel-air mixture.
Procedure for adjusting the engine's idling speed.
Warning against using the cutter if idle speed cannot be adjusted correctly.
Guidance on checking and troubleshooting spark plug problems.
Information on the correct spark plug type to use.
Technique for cutting steel and other metals effectively.
Technique for cutting stone and concrete, managing heat and dust.
Technical data for engine, spark plug type, and gap.
Technical data for carburetor model, fuel mixture, and tank capacity.
Machine weight, cutting wheel specs, and ignition system warning.
Checklist for operator readiness and machine preparation.
Checklist for safe operation, refueling, and engine starting.
Checklist for safe cutting practices and machine care/storage.
Details on warranty rights, obligations, coverage, and commencement date.
Information on filing claims, obtaining service, and maintenance responsibilities.
List of parts/services covered and not covered by the warranty.
General
