Partner K950 CHAIN - Assembly; How to Tension the Chain; How to Change the Chain and Rim

English – 13
ASSEMBLY
How to tension the chain
Tighten the adjust screw.
Close the adjust screw cover.
Untensioned chain.
Start with opening the adjust
screw cover.
Pull the handle backwards.
Continue to move the handle
down-wards until you start to
tension the chain.
Hold the bar upwards as you
move the handle forward.
How to change the chain and rim
Lift out the top of the inner
handle and move it anti-
clockwise.
Unscrew the outer handle.
Remove the cover.
Remove the bar and chain.
Remove the spring holding the
two "half-moons" using a
screwdriver.
Remove the "half-moons", the
cup and rim.
Remove the drive wheel.
Assembly takes place in the
reverse order.