Need help?Do you have a question about the Parweld XTI-160 M and is the answer not in the manual?
Guidance on carefully removing the welding machine from its packaging and retaining it for potential returns.
Recommendations for selecting a suitable, well-ventilated operating environment for the welder.
Instructions for correctly connecting the power supply and ensuring proper grounding of the welding machine.
Procedures for setting up the MIG welding torch, including drive roll and wire installation.
Detailed instructions and controls for performing MIG welding operations, including parameter settings.
Catalog of replacement parts for welding torches, such as electrode holders, earth leads, and TIG torch kits.
Information on gas regulators, flow meters, and fittings suitable for welding applications.
Statement confirming compliance with RoHS directive regarding restriction of hazardous substances.
Information regarding waste electrical and electronic equipment disposal regulations and Parweld's compliance.
Details on the limited warranty terms, conditions, and limitations for the welding product.
General| Input Voltage | 230V |
|---|---|
| Input Frequency | 50/60Hz |
| Input Current | 16A |
| Output Current Range | 10-160A |
| Open Circuit Voltage | 70V |
| Efficiency | 85% |
| Power Factor | 0.73 |
| Insulation Class | F |
| Protection Class | IP21S |
| Cooling System | Fan Cooled |
| Electrode Diameter Range | 1.6-4.0mm |
| Welding Process | MMA |
To Next Page