Need help?Do you have a question about the Parweld XTT 202P and is the answer not in the manual?
Covers electric shock risks, body protection, and grounding precautions.
Details dangers from welding fumes, arc rays, sparks, and fire prevention.
Explains the machine's advanced inverter technology and benefits.
Provides key performance data, electrical ratings, and compliance information.
Identifies and explains the function of each button, switch, and display on the front panel.
Explains the 2-step and 4-step operation modes for the torch trigger.
Covers unpacking procedures and requirements for placing the welding machine.
Details input power, grounding, output polarity, and work return lead connections.
Information on the liquid cooling system, its function, and maintenance requirements.
Guidance on MMA welding, including material effects and electrode selection.
Instructions for basic TIG welding, including connections and torch starting methods.
Step-by-step guide for configuring the machine for DC TIG welding without pulse.
Lists and describes various parts and consumables for TIG torches.
Configuration steps for AC TIG welding, including frequency and balance settings.
How to enable and use the pulse function for TIG welding to control heat.
Detailed setup for MMA welding, including arc force, hot start, and arc length adjustments.
Configuration of peak current, duration, background current, and frequency for pulsing.
Common MMA welding issues like porosity, cracks, and gaps with potential causes and remedies.
Troubleshooting problems related to weld fusion and non-metallic particle inclusions.
Addresses issues in TIG welding like bead profile, penetration, and electrode melting.
Solutions for issues like no arc, low output, and unstable arc during welding.
Diagnosing issues like loss of power, no output, or the fault lamp being illuminated.
Guidelines for cleaning and inspecting the welding machine for optimal performance.
Lists available torch spares, gas regulators, and flow meters for the welding machine.
Specifics on gas regulators and flow meters, including features and fittings.
Identifies the air-cooled TIG welding torch and its rating information.
Detailed diagram showing numbered parts of the TIG welding torch assembly.
Lists various standard and long gas lens collets and cups for TIG torches.
Details torch heads, ceramic cups, handles, and other essential torch parts.
States the machine's compliance with relevant EU directives and harmonised standards.
Confirms adherence to the RoHS directive regarding hazardous substances.
Provides information on the proper disposal of electrical and electronic equipment.
Outlines Parweld's limited warranty terms, conditions, and limitations of liability.
General| Input Voltage | 230V |
|---|---|
| Input Frequency | 50/60Hz |
| Output Current Range | 10-200A |
| Duty Cycle (200A) | 35% |
| TIG Function | Yes |
| MMA Function | Yes |
| Pulse Function | Yes |
| Open Circuit Voltage | 62V |
| Welding Process | TIG, MMA |
| TIG Welding Current Range | 10-200A |
| Type | Inverter |
| Input Phase | Single Phase |
| Duty Cycle | 35%@200A |
| Protection Class | IP23S |
To Next Page