Need help?Do you have a question about the Parweld XTM 201i and is the answer not in the manual?
Details hazards associated with electric shock and precautions to prevent them, alongside risks from welding fumes and gases.
Covers the dangers of arc rays to eyes and skin, and protective measures against fire and explosion risks.
Covers Synergic and Manual MIG welding, parameter optimization, and burn back settings.
Identifies common welding problems for MMA and TIG, with causes and remedies.
Addresses power source issues, including no output, fault lamps, and circuit defects.
General| Type | Inverter |
|---|---|
| Input Voltage | 230V |
| Input Current | 16A |
| Output Current Range (TIG) | 10-200A |
| Output Current Range (MMA) | 10-200A |
| Duty Cycle | 60% |
| Efficiency | 85% |
| Power Factor | 0.93 |
| Insulation Class | F |
| Protection Class | IP21S |
| Weight | 8.5kg |
| Welding Process | TIG, MMA |
| Duty Cycle (TIG) | 60% at 200A |
| Duty Cycle (MMA) | 60% at 200A |
To Next Page
