Need help?Do you have a question about the Parweld XTM 211Di and is the answer not in the manual?
General| Input Voltage | 230V |
|---|---|
| Input Current | 16A |
| Output Current Range (MIG) | 30-210A |
| Output Current Range (MMA) | 20-210A |
| Process Types | MIG, MMA, TIG |
| Wire Feed Speed Range | 2-15 m/min |
| Wire Diameter (MIG) | 0.6-1.0 mm |
| Wire Diameter (Flux Cored) | 0.8-1.0 mm |
| Electrode Diameter (MMA) | 1.6-4.0 mm |
| Protection Class | IP21S |
| Type | Multi-process |
To Next Page